 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. D FLIP-FLOP WITH SET AND RESET SY10EL31 SY100EL31 SY10EL31 SY100EL31 FEATURES s s s s 475ps propagation delay 2.8GHz toggle frequency Internal 75K input pull-down resistors Available in 8-pin SOIC package DESCRIPTION The SY10/100EL31 are D flip-flops with set and reset. The devices are functionally equivalent to the E131 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster than the E131, the EL31 is ideally suited for those applications which require the ultimate in AC performance. Both the set and reset inputs are asynchronous, level triggered signals. Data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock. PIN NAMES Pin D Q S R CLK Data Inputs Data Outputs Set Reset Clock Input Function TRUTH TABLE(1) D L H X X X S L L H L H R L L L H H CLK Z Z X X X Q L H H L Undef NOTE: 1. Z = LOW-to-HIGH transition. M9999-120705 hbwhelp@micrel.com or (408) 955-1690 Rev.: G Amendment: /0 1 Issue Date: December 2005 Micrel, Inc. SY10EL31 SY100EL31 PACKAGE/ORDERING INFORMATION Ordering Information(1) S D CLK R 1 S 2 3 R 4 5 VEE D Flip-Flop 7 6 Q Q 8 VCC Part Number SY10EL31ZC SY10EL31ZCTR(2) SY100EL31ZC SY100EL31ZCTR(2) SY10EL31ZI SY10EL31ZITR(2) SY100EL31ZI SY100EL31ZITR(2) SY10EL31ZG(3) SY10EL31ZGTR(2, 3) SY100EL31ZG(3) SY100EL31ZGTR(2, 3) Package Type Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Operating Range Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Package Marking HEL31 HEL31 XEL31 XEL31 HEL31 HEL31 XEL31 XEL31 HEL31 with Pb-Free bar-line indicator HEL31 with Pb-Free bar-line indicator XEL31 with Pb-Free bar-line indicator XEL31 with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu 8-Pin SOIC (Z8-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-120705 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10EL31 SY100EL31 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol IEE Parameter Power Supply Current 10EL 100EL Power Supply Voltage 10EL 100EL Input HIGH Current Min. -- -- -4.75 -4.20 -- Typ. 27 27 -5.2 -4.5 -- Max. 32 32 -5.5 -5.5 150 Min. 18 18 -4.75 -4.20 -- TA = 0C Typ. 27 27 -5.2 -4.5 -- Max. 32 32 -5.5 -5.5 150 TA = +25C Min. 18 18 -4.75 -4.20 -- Typ. 27 27 -5.2 -4.5 -- Max. 32 32 -5.5 -5.5 150 TA = +85C Min. 18 21 -4.75 -4.20 -- Typ. 27 31 -5.2 -4.5 -- Max. 32 37 V -5.5 -5.5 150 A Unit mA VEE IIH AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol fMAX tPD Parameter Maximum Toggle Frequency Propagation Delay to Output CLK S, R Set-up Time Hold Time Set/Reset Recovery Minimum Pulse Width CLK, Set, Reset Output Rise/Fall Times Q (20% to 80%) Min. 20 Typ. 2.5 Max. -- Min. 2.2 TA = 0C Typ. Max. 2.8 -- 2.2 TA = +25C Min. Typ. 2.8 Max. -- 2.2 TA = +85C Min. Typ. 2.8 Max. -- Unit GHz ps 315 295 150 250 400 400 100 465 455 0 100 200 -- 225 630 630 -- -- -- -- 350 365 345 150 250 400 400 100 465 455 0 100 200 -- 225 580 580 -- -- -- -- 350 375 355 150 250 400 400 100 475 465 0 100 200 -- 225 590 590 -- -- -- -- 350 430 400 150 250 400 400 100 530 510 0 100 200 -- 225 645 645 -- -- -- -- 350 ps ps ps ps ps tS tH tRR tPW tr tf M9999-120705 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10EL31 SY100EL31 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-120705 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY10EL31ZG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |